Triton Shortcuts, collected by Jose Abreu

[MENU] key + numeric keys [0]-[ 9] 
 Access the pages within a mode 

[ENTER] key + numeric keys [0]-[ 9] 
 Access the page menu commands in each page (up to ten items) 
By pressing the Enter button in conjunction with any of the numeric buttons
will call up commands as found in the drop down menu for whichever screen
you happen to be on. For example, if you touch the arrow in the top right
hand side of the screen while in Combination mode, you will see two choices;
"Write Combination" and "Solo Selected Timbre". Instead of touching the
screen and making one of those selections, you can simply do the following:
Holding Enter and "0" Buttons = Write Combination
Holding Enter and "1" Buttons = Solo Selected Timbre

If there were more commands, they would could be called up in the same
fashion; Enter and 3, Enter and 4, Enter and 5, etc. Every Menu page of
every mode follows the same rule, even though the menus differ slightly.
Below, we have documented examples of more commonly used menus. But with
this formula in mind, you can explore and learn to use the menus to expedite
your work... and keep your screen cleaner to boot!
Sequencer Mode P:00 - Play/Rec. Page
Holding Enter and 0 = Memory Status
Holding Enter and 1 = Solo Selected Timbre
Holding Enter and 2 = Rename Song
Holding Enter and 3 = Delete Song
Holding Enter and 4 = Copy Song
Holding Enter and 5 = Copy from Combination
Holding Enter and 6 = Load Template Song
Holding Enter and 7 = Save User Template
Holding Enter and 8 = Fast Forward/Rewind speed
Holding Enter and 9 = Set Location Point

Sequencer Mode P:05 - Track Edit Page
Holding Enter and 0 = Memory Status
Holding Enter and 1 = Step Recording Mode
Holding Enter and 2 = Event Edit Mode
Holding Enter and 3 = Erase Track
Holding Enter and 4 = Copy Track
Holding Enter and 5 = Bounce Track
Holding Enter and 6 = Erase Measure
Holding Enter and 7 = Delete Measure
Holding Enter and 8 = Insert Measure
Holding Enter and 9 = Set Location Point

Sequencer Mode P:08 - Insert Effects Page
Holding Enter and 0 = Memory Status
Holding Enter and 1 = Solo Selected Track
Holding Enter and 2 = Copy Insert Effects
Holding Enter and 3 = Swap Insert Effects
Holding Enter and 4 = Drum Kit IFX Patch
Holding Enter and 5 = Fast Forward/Rewind speed
Holding Enter and 6 = Set Location Point

Sequencer Mode P:09 - Master Effects Page
Holding Enter and 0 = Memory Status
Holding Enter and 1 = Copy Master Effects
Holding Enter and 2 = Swap Master Effects
Holding Enter and 3 = Fast Forward/Rewind speed
Holding Enter and 4 = Set Location Point


Sample Mode - All Pages
Holding Enter and 0 = Delete Sample
Holding Enter and 1 = Copy Sample
Holding Enter and 2 = Rename Sample
Holding Enter and 3 = Delete Multisample
Holding Enter and 4 = Copy Multisample
Holding Enter and 5 = Rename Multisample
Holding Enter and 6 = Convert Multisample to Program
Holding Enter and 7 = Multisample Mono to Stereo Conversion
Holding Enter and 8 = Sample Mono to Stereo
Holding Enter and 9 = Keyboard Display


Song Play Mode P:00 - Prog/Mix Page
Holding Enter and 0 = GM Initialize
Holding Enter and 1 = Solo Selected Timbre
Holding Enter and 2 = Load Template Song
Holding Enter and 3 = Save Template Song
Holding Enter and 4 = Set Location Point


Global Mode P:00 - Basic Setup Page
Holding Enter and 0 = Write Global Setting
Holding Enter and 1 = Change All Bank Preferences
Holding Enter and 2 = Touch Panel Calibration
Holding Enter and 3 = Half Damper Calibaration

Global Mode P:05 - Drum Kit Page
Holding Enter and 0 = Write Drum Kit
Holding Enter and 1 = Rename Drum Kit
Holding Enter and 2 = Copy Drum Kit
Holding Enter and 3 = Copy Key Setup

Global Mode P:6 - User Arpeggio Page "Pattern Setup" Tab
Holding Enter and 0 = Write Arpeggio
Holding Enter and 1 = Rename Arpeggio
Holding Enter and 2 = Copy Arpeggio

Global Mode P:6 - User Arpeggio Page "Pattern Edit" Tab
Holding Enter and 0 = Write Arpeggio
Holding Enter and 1 = Rename Arpeggio
Holding Enter and 2 = Copy Arpeggio
Holding Enter and 3 = Initialize Setup
Holding Enter and 4 = Copy Step
Holding Enter and 5 = Delete Step
Holding Enter and 6 = Insert Step
Holding Enter and 7 = Rotate Step


GENERAL
[ENTER] key + [LOCATE] key 
 In Sequencer mode and Song Play mode, set the current location as the
"Location" (equivalent to the "Set Location" page menu command) 

[ENTER] key + keyboard 
 Input note number values or velocity values
 Select "KEY" in Global P5: Drum Kit, Sequencer P5: